DC Power Distribution Box DCPD6 the total appearance
Model | DCPD6 |
Dimensions (H*W*D) | 482.6 mm x 228 mm x 43.6 mm |
Weight | ≤5KG |
Input | -48V, 100A MAX |
Output | -48V, 20A MAX.Per |
Working temperature | -40℃ to 70℃ |
Relative humidity | 10%-95%(25℃) |
Atmosphere pressure | 70kPa~106kPa |
PRODUCT DETAILS
DC power supply distribution box DCPD6, installed in the cabinet and connected between - 48 V DC power supply and equipment, is a class C drawer type surge protective power supply cabinet. It is suitable to indoor low-voltage DC power distribution system for protection of equipment from surge and transient over-voltage caused by outside environment (such as lightning, EMI, switching effects of the system) or internal environment (power on and off, startup or shut off of inductance and capacitance loads, etc.) with the following features.
• 19 inches 1U standard rack installation;
• 1 input and 9 outputs;
• Good insulation for output terminals
• Large discharge current and low residual voltage
• Remote signal alarm connectors (dry contacts of remote signal alarm is closed at normal operation while open at fault condition).
PRODUCT ADVANTAGES
• With 1 way input, 9 ways output lightning protection distribution function.
• Chase flow capacity, low residual pressure.
• The input can support A maximum current of 100 A, output 9 channels, and the maximum rated load current of each channel is 10 A / 20 A.
• Equipped with fault remote warning interface (dry contact signal).
• Adopt metal shell, protection grade IP2X, installed indoors, with good flame retardant.
• The front exit mode is adopted, which does not take up separate space
PRODUCT APPLICATION INTRODUCTION
DCPD6 series DC power distribution unit is used in low voltage dc power distribution system, connected in series in DC power supply between the line and the system equipment, as a result of external (lightning strikes, electromagnetic radiation interference, etc.) or system internal (the system closes effect、start and stop of inductive and capacitive loads,etc.) protective equipment for surge pulses and transient overvoltages caused by effects.
DCPD6 Power Distribution for BBU and RRU
Copyright © 2019YANTAI YUNPAN INTERNATIONAL TRADE CO.,LTD. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.