installation gsm bts base station on sale for home

Product Information of installation gsm bts base station on sale for home

Product Overview

Introduction

ZXSDR R8863 (hereinafter R8863) is the distributed Remote Radio Unit (RRU) used in Uni-RAN total solution, It is designed with 3 transmitters. Based on the common new generation RRU platform, R8863 can work in GSM, UMTS or LTE single mode or Multi-Mode in the same frequency band. The document is designed to give an overview of the characteristics of R8863, its key benefits, the architecture, functionality and services, as well as the system capabilities.

Benefits

R8863 provides the following benefits to operators.

•The compact RRU design enables operators to uses only one R8863 module instead of three RRUs for one three-cell site. Higher integration brings fewer modules, less space, lower load-bearing requirements and faster installation procedure.

•ZXSDR R8863’s PA adopts advanced efficiency enhancement technologies to achieve high power efficiency, including Doherty PA, DPD linear technology and MCPA technology. With these features, RRU power consumption gets a remarkable decrease.

•It flexibly supports GSM, UMTS and LTE systems by software configuration. Instead of running hardware on independent platforms for each technology, operators can implement various wireless technologies in software on the same hardware platform. With two R8863, it supports LTE system.

•Passive thermal dissipation design also contributes to power saving and less noisy.

•The operation and maintenance of one single wireless network with fewer modules is much simpler than multiple system networks. Fewer engineers are required and less implementation to be taken for system interworking or upgrade.

Application Scenarios

R8863 and one Base Band Unit (BBU) form a complete BTS/NodeB, implementing radio transmission in the covered area, controlling radio channels and realizing the communication with the Base Station Controller (BSC/RNC) or EPC. It supports indoor and outdoor applications.

Functionality

R8863 supports functionalities as follows.

 Supports multi-band of 900M/1800M/2100MHz.

 Supports three sectors with one way transmitting and two-way receiving for each sector.

 Supports the configuration of 5MHz/4.8MHz/4.6MHz/4.4MHz/4.2MHz channel interval for UMTS carrier.

 Support the configuration of 1.4MHz/3MHz/5MHz/10MHz/15MHz/20MHz scalable bandwidth for LTE carrier.

 Supports GSM only, UMTS only, LTE only or GU/GL Dual-Mode.

 Supports 2T2R for one cell by combination of two R8863s which can optimize LTE spectrum efficiency greatly and improve network uplink performance.

 Supports 64QAM modulation in both LTE downlink and uplink.

 Supports RTWP report interval at 100ms and 2ms.

 Supports transmit power reporting function for every carrier.

 Supports over loading protection function for power amplifier.

 Supports measurement, compensation and adjustment function for channel delay.

 Supports dynamic PA voltage adjustment to achieve the best efficiency in different system loads.

 Supports transmitting channel switching on/off function.

 Supports built-in lightning protection function for DC power supply.

Technical Specifications

Dimension (H*W*D): 440 mm * 360 mm * 133 mm (21L)

Weight: 25 Kg

R8863 Operation Frequency Band:

System	RRU Frequency Spectrum(MHz)
GSM single mode	900/1800
UMTS single mode	900/2100
LTE single mode	900/1800
GU Dual-Mode	900
GL Dual-Mode	900/1800

Product Details

YUNPAN pays great attention to product quality and strives for perfection in every detail of products. This enables us to create fine products.YUNPAN's optical line terminal equipment is manufactured in strict accordance with relevant national standards. Every detail matters in the production. Strict cost control promotes the production of high-quality and priced-low product. Such a product is up to customers' needs for a highly cost-effective product.

Company Advantages
1. YUNPAN gsm bts base station is precisely accurate to the design specifications.
2. This product offers fire safety & prevention. The materials used for it must meet the requirement in IEC 60695-2-10:2013 otherwise no approval is possible.
3. This product is not prone to pill, which can turn even the softest bedding into an uncomfortable situation when balls of the fabric start to build up.
4. Thanks to its easy operation and maintenance during its service life, this product can greatly help reduce operation costs.
5. This product can help people finish tasks that are too heavy or difficult. It significantly reduces the work burden for people.

Company Features
1. Over the years, Yantai yunpan international trade Co.,Ltd. has worked to develop, design, and manufacture cellular transceiver . We have extensive knowledge and expertise.
2. Yantai yunpan international trade Co.,Ltd. has a complete and scientific quality management system.
3. Yantai yunpan international trade Co.,Ltd. uses what is base transceiver station for the purpose of tenet. Inquire now! The essence in service idea of Yantai yunpan international trade Co.,Ltd. is radio base station components . Inquire now! To implement bts power amplifier is the base of Yantai yunpan international trade Co.,Ltd.'s work.

Product Message

*Name

Phone

*E-mail

*Content

Relevant Articles

What are raw materials for optical transmitter production?

Optical transmitter is manufactured from superior materials using modern technology. The specific raw materials vary with projects. The first step in a process is often the most important. Thus manufacturers in this industry emphasize much on raw materials and never skimp on raw materials. Quality variation of the raw materials used in the production will often lead to variation in the quality of the final products. Yantai yunpan international trade Co.,Ltd. is able to produce large quantities of bnc to bnc connector. YUNPAN's sfp optical module series contains multiple sub-products. Before production, the electrode materials of YUNPAN SDH Transmission are carefully handled to prevent them from coming into contact with each other. Because contamination between the anode and cathode materials will ruin the battery. It supports flexible networking, including star, link, and Ethernet ring networking modes. Containing high quality LED driver, the product enjoys long durability. Its LED driver works stably and has good transformation efficiency, enabling the stable performance of the product. The product has high signal receiving or sending sensitivity.We are responsible for society and our surrounding environment. We are working hard to create a green living environment that features less carbon footprint and pollution.

What properties are needed in optical transmitter raw materials?

The raw materials should have the properties that contribute to the overall performance and quality of the product itself and the production process. The raw materials also should not do harm to workers, and damage equipment and the environment seriously during processing. optical transmitter manufacturers should carefully test their raw materials to see if they meet the production requirements and safety and quality standards and if they have the desired properties that benefit the usability and durability of optical transmitter. Yantai yunpan international trade Co.,Ltd. is one of the top domestic and international producers in China. YUNPAN's lte base station series contains multiple sub-products. YUNPAN cheap gigabit switch is developed integrating with many technologies such as biometrics, RFID, and self-checkouts, which are widely used in the POS system field. It can improve the network utilization rate and reduce costs for users. Manufactured with integrated encapsulation technology, it works perfectly in resistance to water and moisture, which ensures its stable performance and long service life. The product is widely known for its low power consumption.We actively assume environmental responsibility and will gear our production towards a cleaner, sustainable, and more environmental-friendly way.

How much will it take for optical transmitter materials?

In order to provide the highest quality optical transmitter, manufacturers usually do not save money on raw materials. Manufacturers collect extensive knowledge and long experience in material selection, and can thus bring about the production of maximum value for customers with the products that are final. It may cost customers more to cover for better raw materials, but also the enhanced product performance will surely be worth it. Yantai yunpan international trade Co.,Ltd. is a company that integrates epon onu development, market development, manufacturing and sales. YUNPAN's gepon olt series contains multiple sub-products. YUNPAN user interface board is developed and designed by our experts who have deployed POS technology solutions to small and mid-sized retail merchants for many years. The product is designed to build networks with higher speed and smarter connectivity. YUNPAN has a group of vigorous and enterprising high-quality talents. The product supports multi-port access modes.We actively assume environmental responsibility and will gear our production towards a cleaner, sustainable, and more environmental-friendly way.

How much will it cost for optical transmitter production?

One of the biggest challenges that the optical transmitter manufacturing industry is facing is cost. All manufacturers are working hard to keep the prices down and not sacrifice quality. In global manufacturing, the cost depends on many factors. What Yantai yunpan international trade Co.,Ltd. can share is the most important factors in determining the cost of a production project here in our company, they are the materials used, the size of the product, the manufacturing process used, the required quantity, the tool requirements, etc. And how much it will cost to finish your project will depend on your specific requirements. YUNPAN is a manufacturer of interface board using a high degree of visibility and reputation. YUNPAN's microwave equipment series contains multiple sub-products. All components of YUNPAN point to point microwave radio are CNC machined and finished by hand and all structures produced are fully certified to global structural safety codes. Made of harmless materials, it's eco-friendly. we has a team of experienced and skilled experts. Made of harmless materials, it's eco-friendly.We aim to be a reliable and helpful partner that exceeds expectations and to manufacture products that meet the quality expectations of our clients all over the world.

Installation gsm bts base station on sale for home