installation lte base station manufacturer for hotel

Product Information of installation lte base station manufacturer for hotel

PRODUCT SPECIFICATIONS

ZXSDR R8882 is one distributed Remote Radio Unit (RRU) used in Uni-RAN total solution, with two transmitters. The RRU is based on the common new generation RRU platform, and can work in GSM and UMTS single mode or multi-mode in the same frequency band.

Benefits:

Software Defined Radio (SDR) is the evolution of base station technology. ZXSDR series has made great effort and invested much in this new technology for many years. And then the R8882 RRU product and B8200 BBU product based on SDR technology were released.

SDR Uni-RAN architecture supports GSM, UMTS, LTE and Uni-RAN simultaneously. Operators then can benefit a lot from SDR platform. The following part lists the key benefits for operators.

lHigh performance

To meet the growing demands for wide working bandwidth, R8882 modules with full working bandwidth are released. Maximum working bandwidth of R8882 is 75MHz for 1800M band and 35MHz for 900M band. For frequency spectrums become scarce, resources allocated for operators tend to be characterized with fragmentation and large span. RRUs with full working bandwidth integrate more spectrum resources and help to decrease hardware investment exponentially.

lClearer and simpler network

R8882 supports GSM, UMTS, LTE or mixed technologies. Instead of running hardware on independent platforms for each technology, operators can implement various wireless technologies in software on the same hardware platform.

Since hardware platforms can be reused, there is significantly less investment risk for deploying hardware. Wireless technologies are developing so fast, and investing on one technology may bring risks to operators. SDR-based solutions will decrease the investment risk since SDR platform can support various technologies.

lLower Total Cost of Ownership(TCO)

ZXSDR R8882’s PA adopts advanced efficiency enhancement technologies to realize high power efficiency, such as Doherty PA, DPD linear technology and MCPA technology. Power consumption can be greatly decreased together with these features. Passive thermal dissipation design also contributes to power saving and less noisy. The operation and maintenance of one single wireless network is much simpler than multiple system networks. Fewer engineers are required and less implementation to be taken for system interworking or upgrade.

Physical Structure:

R8882 is the multi-carrier RF module with two transmitters. It has two PAs, with both PAs working on 850M/900M/1800M/1900M/2100MHz/AWS. There are two types of R8882, 2T2R and 2T4R. The differences between 2T2R and 2T4R modules include working bandwidth and number of receivers. In the physical appearance, R8882 2T4R has four antenna feeder interfaces but R8882 2T2R only has two. Except this, there is no difference in the shell.

ZXSDR R8882 External Interfaces Description:

S.N.	Label	Interface	Interface Type/Connector
1	PWR	-48V DC power input interface	2-pin round metal connector (male)
2	MON	External monitoring interface	8-pin straight panel mount round socket (male)
3	AISG	AISG interface	8-pin socket with a square base
4	GND	PE interface	16 mm² yellow-green round terminal
5	OPT1	BBU and RRU Interface/RRU cascading interface	LC type optical interface (IEC 874)
6	OPT2	BBU and RRU Interface/RRU cascading interface	LC type optical interface (IEC 874)
7	ANT4 (TX1/RX1)	Antenna feeder interface (Tx1/Rx1)	50 Ω DIN-mode connector
8	ANT3 (RX3) (Optional*)	Antenna feeder interface (Rx3)	50 Ω DIN-mode connector
9	ANT2 (RX2) (Optional*)	Antenna feeder interface (Rx2)	50 Ω DIN-mode connector
10	ANT1 (TX0/RX0)	Antenna feeder interface (Tx0/Rx0)	50 Ω DIN-mode connector
11	LMT	Ethernet interface for operation and maintenance	8P8C shielded right angle PCB mount jack with LED (left yellow, right green)

ZXSDR R8882 Physical Indices:

Item	Index
Dimension (HWD)	480320150 mm (23L)
Weight	23 Kg
Color	Silver gray

Operation Frequency Band:

Item

Index

Operation frequency band

GSM single mode: 850M/900M/1.8G/1.9GHz

UMTS single mode: 850M/900M/1.9G/2.1GHz/AWS

LTE single mode: 850M/900M/1.8G/1.9G/2.1GHz/AWS

G/U dual-mode: 850M/900M/1.9GHz

G/L dual-mode: 900M/1.8GHz

U/L dual-mode: 900M/2.1GHz

Enterprise Strength

YUNPAN believes credibility has a huge impact on the development. Based on customer demand, we provide excellent services for consumers with our best team resources.

Company Advantages
1. YUNPAN bts power amplifier is made of the finest materials that have passed our strict materials selection system.
2. There are many functions for lte base station for your choice.
3. It is designed to have a long lifespan to achieve cost-effectiveness.
4. YUNPAN Transmission Equipment has found its growing popularity and acceptance among overseas customers.

Company Features
1. In the ever changing market, YUNPAN always understands customers' needs and make change.
2. Having been qualified with certificated quality assurance, our finest lte base station has got more and more recognition from customers.
3. In the bts power amplifier industry, the YUNPAN brand will pay more attention to service quality. Call! The YUNPAN brand is committed to being a vision of a competitive manufacturer. Call!

Product Message

*Name

Phone

*E-mail

*Content

Relevant Articles

What are raw materials for optical transmitter production?

Optical transmitter is manufactured from superior materials using modern technology. The specific raw materials vary with projects. The first step in a process is often the most important. Thus manufacturers in this industry emphasize much on raw materials and never skimp on raw materials. Quality variation of the raw materials used in the production will often lead to variation in the quality of the final products. Yantai yunpan international trade Co.,Ltd. is able to produce large quantities of bnc to bnc connector. YUNPAN's sfp optical module series contains multiple sub-products. Before production, the electrode materials of YUNPAN SDH Transmission are carefully handled to prevent them from coming into contact with each other. Because contamination between the anode and cathode materials will ruin the battery. It supports flexible networking, including star, link, and Ethernet ring networking modes. Containing high quality LED driver, the product enjoys long durability. Its LED driver works stably and has good transformation efficiency, enabling the stable performance of the product. The product has high signal receiving or sending sensitivity.We are responsible for society and our surrounding environment. We are working hard to create a green living environment that features less carbon footprint and pollution.

What properties are needed in optical transmitter raw materials?

The raw materials should have the properties that contribute to the overall performance and quality of the product itself and the production process. The raw materials also should not do harm to workers, and damage equipment and the environment seriously during processing. optical transmitter manufacturers should carefully test their raw materials to see if they meet the production requirements and safety and quality standards and if they have the desired properties that benefit the usability and durability of optical transmitter. Yantai yunpan international trade Co.,Ltd. is one of the top domestic and international producers in China. YUNPAN's lte base station series contains multiple sub-products. YUNPAN cheap gigabit switch is developed integrating with many technologies such as biometrics, RFID, and self-checkouts, which are widely used in the POS system field. It can improve the network utilization rate and reduce costs for users. Manufactured with integrated encapsulation technology, it works perfectly in resistance to water and moisture, which ensures its stable performance and long service life. The product is widely known for its low power consumption.We actively assume environmental responsibility and will gear our production towards a cleaner, sustainable, and more environmental-friendly way.

How much will it take for optical transmitter materials?

In order to provide the highest quality optical transmitter, manufacturers usually do not save money on raw materials. Manufacturers collect extensive knowledge and long experience in material selection, and can thus bring about the production of maximum value for customers with the products that are final. It may cost customers more to cover for better raw materials, but also the enhanced product performance will surely be worth it. Yantai yunpan international trade Co.,Ltd. is a company that integrates epon onu development, market development, manufacturing and sales. YUNPAN's gepon olt series contains multiple sub-products. YUNPAN user interface board is developed and designed by our experts who have deployed POS technology solutions to small and mid-sized retail merchants for many years. The product is designed to build networks with higher speed and smarter connectivity. YUNPAN has a group of vigorous and enterprising high-quality talents. The product supports multi-port access modes.We actively assume environmental responsibility and will gear our production towards a cleaner, sustainable, and more environmental-friendly way.

How much will it cost for optical transmitter production?

One of the biggest challenges that the optical transmitter manufacturing industry is facing is cost. All manufacturers are working hard to keep the prices down and not sacrifice quality. In global manufacturing, the cost depends on many factors. What Yantai yunpan international trade Co.,Ltd. can share is the most important factors in determining the cost of a production project here in our company, they are the materials used, the size of the product, the manufacturing process used, the required quantity, the tool requirements, etc. And how much it will cost to finish your project will depend on your specific requirements. YUNPAN is a manufacturer of interface board using a high degree of visibility and reputation. YUNPAN's microwave equipment series contains multiple sub-products. All components of YUNPAN point to point microwave radio are CNC machined and finished by hand and all structures produced are fully certified to global structural safety codes. Made of harmless materials, it's eco-friendly. we has a team of experienced and skilled experts. Made of harmless materials, it's eco-friendly.We aim to be a reliable and helpful partner that exceeds expectations and to manufacture products that meet the quality expectations of our clients all over the world.

Installation lte base station manufacturer for hotel

Physical Structure:

Operation Frequency Band: