Product Overview
Product Type | Description | BOM | Model |
NE40E-X16 | NE40E-X16 Integrated Chassis Components (Including 8 DC Power) | 02351931 | CR5B0BKP1670 |
Slot Layout
Interface Numbering
An interface is numbered in the format of slot number/card number/port number
NOTE:
Slot number: The slots of LPUs are numbered from 1 to 16. The slot number increases from left to right and from top to bottom, facing the front panel of the NE40E (there are corresponding marks on the panel).
Card number:
•Upper chassis
•The cards of LPUs are numbered from top to bottom and from right to left beginning with 0. If there is no card on a board, the card number is set to 0.
•Lower chassis
•The cards of LPUs are numbered from bottom to top and from left to right beginning with 0. If there is no card on a board, the card number is set to 0. Port number:
•Upper chassis
•The ports of LPUs are numbered from left to right and from top to bottom beginning with 0.
•Lower chassis
•The ports of LPUs are numbered from right to left and from bottom to top beginning with 0.
Technical Specifications
BD-100M-1F4T | 5-Port Switch Ethernet , with DIP switch, one-key port isolation, 4*10/100M ethernet RJ45 ports, single fiber, SC, 20km, power AC or DC. |
Technology
Support Standard:
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseT
Switch Properties
Backboard bandwidth:1Gbps MAC address table: 1K
Message cache size: 512Kbits
Interface
Optical interface: 100Mbps (Interface type: SC, ST, FC and SFP Slot are available)
Network interface: 10/100Mbps self-adaptation, Full/Half duplex mode,support MDI/MDI-X. normal transmission distance 0-100m; long distance mode 0-350m.
DIP switch: , ‚
LED indicator: PWR, Link, 10/100Base-T
Optical Fiber
| 1000BaseFX | |
Multimode | Single-Mode | |
Wavelength | 850 nm | 1310 /1550nm |
Maximum transmit power | -10 dBm | 0 dBm |
Minimum transmit power | -20 dBm | -5 dBm |
Receiving sensitivity | -32 dBm | -34 dBm |
Link budget | 12 dB | 29 dB |
Transmisson distance | 5kma 4 kmb | 40 kmc |
Saturation | -6 dBm | -3 dBm |
a. 50/125um,800 MHz*km optical fiber cable b. 62.5/125 um,500MHz*km optical fiber cable c. 9/125um Single-Mode optical fiber cable |
Power Supply |
Input voltage: 100~240V AC
Input current: max 30mA
Physical Properties
Housing:metal, IP30 protection
Dimension: 125x109x 32 mm
Weight:430g
Installation mode: desktop installation, wall-mounted installation
Environmental Constraint
Working temperature: -20 ~ 60°C(-4 ~ 140°F)
Storage temperature: -40 ~ 85°C(-40 ~ 185°F)
Environment relative humidity: 5 ~ 95% (non-condensing)
Standard and Certification
Electromagnetic interference (EMI): FCC Part 15/CISPR22(EN55022): Class A
Electromagnetic sensibility (EMS):
IEC61000-4-2 (ESD) Class 3, IEC 61000-4-3 (RS) Class 3, IEC 61000-4-4 (EFT) Class 2, IEC 61000-4-5 (Surge) Class 3, IEC 61000-4-6 (CS) Class 3
Vibration resistance: IEC60068-2-6
Impact resistance: IEC60068-2-27
Free falling: IEC60068-2-32
Note: Please visit Wintop official website to check the latest certifications.
MTBF (mean time between failures)
Time:500000h
Warranty
Quality warranty: 3 years
Copyright © 2019YANTAI YUNPAN INTERNATIONAL TRADE CO.,LTD. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.