Wholesale Arcade Interface Manufacturer, Motor Control Kit

H801SCUK Board

The H801SCUK board is a super control unit board. It is the core of the system control and service switching and aggregation. The H801SCUK board can also function as the management and control core of the integrated network management system (NMS). It communicates with service boards about the key management and control information through the master/slave serial port and inband GE/10GE channel. In this manner, the H801SCUK board configures, manages, and controls the device, and also implements the simple route protocol functions.

Feature and Specifications

SCU Boards Comparison

All SCU boards support the functions as below:

System control and management unit

Active/standby switchover

Local and remote maintenance through maintenance serial port CON or maintenance Ethernet port ETH

Environmental monitoring through environment monitoring serial port ESC

In the table, "Yes" indicates "supported" and "No" indicates "not supported".

Table 1 Major differences between SCU boards

Board

Access Service

Daughter Board

Load sharing

Ethernet synchronization

Temperature querying and high temperature alarming

Built-in 2GB CF card

Centric Management for GE Remote Extended Subracks

D-CMTS

H801SCUK

Optical and copper

H801FLBA

H801CKMC

H801CKMD

H801M2XA (version B)

Yes (supported in V800R011C00 and later versions)

Yes

NOTE:

H801SCUN and H802SCUN are slot compatible.

Table 2 Ports of SCU boards

Board	Panel ports	Internal interfaces
Board	Panel ports	Channel to the service board	Channel to the GIU board	Channel to the standby control board	Note
H801SCUK	4 GE ports	16 GE/10GE channels	Providing two GE/10GE channels for each upstream boards	Providing two 10GE channels for load sharing with the standby H801SCUK board (supported in V800R011C00 and later versions)

PRODUCT

SCUK Super Control Unit Board H801SCUK for MA5680T MA5600T MA5608T