Base Transceiver Station Manufacturers,Bts Power Amplifier

ZXSDR R8862A SUPPORT BAND AS THE FOLLOWING

Model	Working band	PA output power	Chassis Top output power
R8862A S8500	850MHz (Tx:866MHz~880MHz, Rx: 821MHz~835MHz)	2 x 75W	2 x 60W
R8862A S1800	1800 MHz
	Type1:Tx:1805MHz~1860MHz, Rx: 1710MHz~1765MHz
	Type2:Tx:1825MHz~1880MHz, Rx: 1735MHz~1785MHz
	Type3:Tx:1825MHz~1870MHz, Rx: 1730MHz~1780MHz
R8862A S2100	2100MHz (Tx:2110MHz~2170MHz, Rx: 821MHz~835MHz)
R8862A S2600	2600 MHz (Tx:866MHz~880MHz, Rx: 821MHz~835MHz)	2 x 50W	2 x 40W

PRODUCT DETAILS

ZXSDR R8862A S2100 FDD TD-LTE is an outdoor remote radio frequency unit with BBU forms a complete base station. It can realize wireless transmission in the covered area and contol of wireless channel.

ZXSDR R8862A S2100 FDD TD-LTE Small Cell is an integrated small base station that may work in forms such as micro, pico, and femto base stations. It is an important part of wireless coverage solutions to provide wireless coverage in families, enterprises, public areas, and suburban areas.

Products Highlights:

• Compact design, ultra small size, light weight, easy installation

• Large capacity, easy expansion

• Support multi-mode, smooth evolution

• High PA efficiency, energy saving

• IP architecture, rich interfaces

PRODUCT ADVANTAGES

• Minimum volume to reduce the difficulty of deployment:

R8862A, 12L in volume and 14 kg in weight, is the smallest 2T2R RRU of 2*60W output power in the industry. The light and compact design enables it to be easily carried and installed. The load bearing requirement for the tower or wall is reduced.

• SDR 2T2R design to ensure one clear and simple network:

R8862A supports GSM, UMTS or LTE single or mixed technologies. Design of R8862A 2T2R channels ensures the smooth evolution of the system from GSM/UMTS to LTE 2*2 MIMO. Instead of running hardware on independent platforms for each technology, operators can implement various wireless technologies by software configuration on the same hardware platform, such as GSM+LTE in 1800MHz, or UMTS+LTE in 2100MHz. It decreases the investment risk and offers more flexible operation strategies for operators.

• Green RRU with low power consumption:

R8862A's improvement in materials and design of structure and modules, results in higher PA efficiency and lower power consumption than R8882. The remarkable decrease in power consumption effectively reduces the expenditure of power supply equipment such as battery, and electric charges.

ZXSDR R8862A SUPPORT

FUNCTION AS THE FOLLOWING

• support 1.4MHz/3MHz/5MHz/10MHz/15MHz/20MHz multiple bandwidth locations

• support band: 850MHz/1800MHz/2100MHz/2600MHz

• 2 send 4 receive

• uplink and downlink 64QAM modulation

• Transmitting power reporting function under each carrier

• load protection function for PA

• Transmit channel switch function

• RRU power consumption reporting

• save energy (Dynamic voltage regulation and sign off)

• Software failures do not affect cascading RRU

这里可以自定义设置

PRODUCT SPECIFICATIONS

Model	ZXSDR R8862A
*Dimensions (HWD)*	442 mm × 86mm × 310 mm
Weight (Full-Loaded)	≤ 15kg
Support frequency band	850～2600 MHz
Power Supply	-48V DC, Voltage: -38.4V DC～-57V DC
Power Supply	+24V DC, Voltage: +21.6V DC～+29V DC
Power consumption (Full-Loaded)	≤ 250W
Operating Environment	–40°C to 65°C
Operating Environment	5% RH to 95% RH

Boards of BBU
MODEL	FULL NAME	Support qty	Description
CC	Control and Clock Board	1-2	Realize BBU master control and clock
BP(BPL)	Basebnd Processing Board	B8300:1-9 B8200:1-5	Realize baseband processiong
UCI	Universal Clock Interface Board	0-2	Connect with RGB through optical fiber
SA	Site Alarm Module	1	Realize site alarm monitoring and environment monitoring
SE	Site Alarm Extension Board	0-1	Realize SA function expansion
PM	Power Module, -48V DC input	1-2	Realize BBU DC power input, power supply
FA	Fan Module	1	Realize BBU fans radiating

PRODUCT APPLICATION INTRODUCTION

ZXSDR R8862A’s location in wireless network:

PRODUCT APPLICATION INTRODUCTION

ZXSDR R8862A can be installed indoors, such as an office building or residence, or be installed in a cabinet with surge protection in an outdoor place, such as a basement, balcony, corridor, or garage.

Distributed Base Stations enable radio access for small to large eLTE wireless private networks that provide services such as video surveillance, data acquisition, and data transmission. The base stations’ modular platform consists of a Base Band Unit (BBU3900) and Remote Radio Unit (RRU). Both components feature flexible installation, easy site deployment, low power consumption, and lower TCO.

PRODUCT DETAILS APPEARANCE

ZXSDR R8862A different frequency

The ZXSDR R8862A front appreance

The side appreance

R8862A is the latest outdoor 2T2R RRU. It is 12L in volume and 14 Kg in weight. Based on new generation of RRU platform, R8862A can work in single GSM, UMTS or LTE single mode or multi-mode in the same frequency band.

R8862A supports the following frequency bands:DD/900/1800/2100MHz (Band1/3/8/20)

Diversified product forms, meeting the deployment demands in families, enterprises, public areas, and suburban areas.

Heterogeneous networking (HetNet) that uses the enhanced inter-cell interference coordination (eICIC) algorithm to optimize macro-micro base station coordination and increase network capacity.

Advanced self-organizing network (SON) technology, supporting self-optimization and self-adaptation of the air interface and coordination of networks with devices from different manufacturers P-bridge indoor coverage solution, which allows data to be transmitted through both network cables and fibers and improves the macro-micro base station coordination effect super-cell networking, which effectively eliminates interference and supports high-speed handover

Deep integration with Wi-Fi and LTE technologies, site sharing, coverage complementation, and load balancing

Easy installation, easy maintenance, and flexible wireless and wired backhaul solutions, which overcomes site resource limitations and realizes fast and low-cost deployment

Compact design

small volume, light weight, easy installation, and energy saving Customer Value

Wide coverage

Supporting 4-level RRU connection in cascade, maximum 100 km for UMTS coverage RRU near antenna installation with less feeder loss and better coverage Multi-RRU for one logical cell used for high speed railway coverage

Rapid Installation

Compact RRU design, Light and small Supporting wall/pole/gantry mounted and on top of tower installation IP65 protection class to withstand terrible environment

Flexible Networking

Supporting ATM/IP dual protocol stacks Providing various interfaces E1/T1/STM-1/GE/SDH/Hybrid/ Satellite

Saving Energy

50% high efficient PA to reduce power consumption Natural cooling design, 0dB noise

Smooth Evolution

MicroTCA based architecture, control & transmission parts totally shared Software defined carrier by MCPA technology 2T4R module introduced for MIMO or 2 sectors Smooth Evolution to HSPA+ and LTE