Lte Base Station Supplier, Ethernet Transceiver

PRODUCT SPECIFICATIONS

Model	ZXG10 B8018
*Dimensions (HWD)*	1600 mm × 600mm × 550 mm
Working frequency	GSM900 GSM850 GSM1800 GSM1900
Operating Environment	–40°C to 65°C 5% RH to 95% RH
Operating Environment	–40°C to 65°C 5% RH to 95% RH
Boards/Modules for ZXG10 B8018
CMB	Control and maintance module
EIB	line impedance, signal isolation etc.
DTRU	GSM900: DTRUG GSM850: DTRUM GSM1800: DTRUD GSM1900: DTRUP
AEM	CDU: Comniner Distribution Unit CEU: Comniner Extension Unit SENU: Combiner Extension Net Unit ECDU:“E” Combiner Distribution Unit
PDM	Overload break protection, power filter

PRODUCT DETAILS

ZXG10 B8018 is third generation communication base station,is an indoor macro cell base station, use dual carrier technology RF module.
ZXG10 B8018’s hardware structure:
CMB: operation maintance module, provide basic operation and central control, includes:alarm control, sync, wireless scource control etc.
EIB: E1/T1 access
PDM: power distribution module, provide power distribution function.
FCM: Fan, realize heat dissipation with the duct inside the chassis.
DTRU: Dual density carrier frequency unit, includes 2 transceiver units, provide wireless function.
AEM: Antenna feeder unit, realize multi frequency signal circuit and branch, includes NCDU, NECDU, NMCDU, NCEU, NCEN and NCEN/2 and so on 6 modules.

When full loaded, ZXG10 B8018 cabinet inserts 3 layers of carrier frequency insert chassis and 1 layer top insert chassis, 3 layers dust insert chassis, the bottom layer is dustproof insert chassis with dustproof cotton.
Every layer carrier chassis load 3 DTRU and 3 AEM modules, every top layer chassis load 1PDM, 2CMB, 1EIB, every dust chassis load 2 fans.
ZXG10 B8018 cabinet is mainly composed of cabinet, cabinet door, cabinet top, chassis, insert chassis and subracks.
B8018 cabinet top mainly used for install antenna, power switch, filter, earthing socket and other sockets hardware etc. It provides 12 feeder holes: HYCOM1-HYCOM12, for antenna feeder penetration.
B8018 top insert chassis can insert 1 PDM, 2CMB and 1EIB(or 1 FIB), 2CMB and 1EIB(or 1 FIB) composed of a control chassis.
B8018 has 3 layers carrier insert chassis, every layer carrier chassis can insert 3AEM and 3DTRU modules.

PRODUCT APPLICATION INTRODUCTION

ZXG10 B8018 is third generation communication base station,is an indoor macro cell base station, use dual carrier technology RF module.

Through Abis interface connects BSC, complete community management, measurement report reporting, system message broadcast, access control, mobility management, wireless resource management, RF processing, and transmission management functions.

PRODUCT DETAILS APPEARANCE

ZXG10 B8018 cabinet Structure

PRODUCT

Lte Base Station ZXG10 B8018