Rru3262 700mhz 2600mhz Dbs3900 Series Base Station Outdoor Remote Radio...

Product Introduction

An RRU3262, which is a remote radio unit for LTE FDD, supports three carriers.

Modes and frequency bands supported by an RRU3262

	Frequency Band(MHz)	Receive Frequency Band (MHz)	Transmit Frequency Band (MHz)	Mode	IBW (MHz)
RRU3262	700 (band28)	703 to 748	758 to 803	LTE FDD	45
RRU3262	2600 (band 7)	2500 to 2570	2620 to 2690	LTE FDD	60

RF specifications of an RRU3262:

Type

Transmit And Receive Channels

Capacity

Receiver Sensitivity(dBm)

Output Power

Receiver Sensitivity with One Antenna

Receiver Sensitivity with Two Antennas

Receiver

Sensitivity

with Four

Antennas

RRU3262

2T4R

•2600 MHz: 3 carriers. The bandwidth per carrier is 5, 10, 15, or 20 MHz.

•700 MHz: 2 carriers. The bandwidth per carrier is 5, 10, 15, or 20 MHz.

•2600MHz:-106.5

•700MHz:-106

•2600MHz:-109.3

•700MHz:-108.8

•2600MHz:-112

•700MHz:-111.5

The RRU3262

supports the

maximum power configuration 2 x60 W. For typical configurations.

Equipment specifications of an RRU3262:

Type

Input Power

Dimension (H x W x D)

Weight (kg)

RRU3262

-48 V DC; voltage range: -57 V DC to -36 V DC NOTE The RRU3262 supports AC power supply when connected to an external AC/DC power module or an OPM15M. For details, see AC/DC Power Module User Guide and OPM15M User Guide.

•2600 MHz: 400 mm x 300 mm x 100 mm (12 L, without the housing)

•700 MHz: 400 mm x 300 mm x 150 mm (18 L, without the housing)

•2600 MHz: ≤ 15 (without the housing)

•700 MHz: ≤ 20 (without the housing)

Environmental specifications of an RRU3262:

Type

Operating Temperature

Relative

Humidity

Absolute

Humidity

Atmospheric

Pressure

Storage Time

RRU3260

• With solar

radiation of 1120W/m2: -40°C to +50°C

•Without solar radiation:-40°C to +55°C

NOTE According to the installation scenario, traffic load, and carrier configuration, the output power of some RRUs may temporarily decrease when they work in the highest 10°C temperature range.

5% RH to

100% RH

1 g/m3

to 30

g/m3

70 kPa to

106 kPa

It is recommended that the device be installed and used within one year after

Its delivery

because of

the failure

rate.